Laboratoires
LABORATORY & PROCESS EXTRACTION
Laboratoires
A connected system.
From source to discharge.
Polymer ductwork, airflow control, grilles and fans coordinated for laboratory and process extraction. Each component is selected for the conveyed medium, airflow duty and installation conditions.
Explore the laboratory ventilation system
Hover over or select a product group to see its role in the system.

Product information: PP ducts & fittings
PP ducts & fittings
Straight ducts, bends, branches and reducers connect the extraction points to the main duct route. Select the polymer grade, wall construction and socket or flange joints for the process.
Circular & rectangular sections
Catalogue pages 9–27Product information: PP VAV units
PP VAV units
GRVT-R-EXN measures airflow through a Venturi element and adjusts the damper to the control setpoint. Coordinate size, airflow limits, controls and any required EX configuration.
GRVT-R-EXN · DN 125–500
Catalogue pages 88–92Product information: PP dampers & air valves
PP dampers & air valves
Manual or actuated components regulate or isolate the selected branch. Match the operating function, seals, leakage requirement and connection geometry to the project.
Shut-off · Backdraft · GPGVUN
Catalogue pages 28–41Product information: PP grilles
PP grilles
Grilles form the room-to-duct interface. Select the opening, airflow duty, mounting arrangement and cleaning access; project-specific designs are included in the range.
Inlet / outlet · Linear · Filtered return
Catalogue pages 56–61Product information: PP & polymer fans
PP & polymer fans
Duct, laboratory, radial and roof-mounted fans are selected by airflow and pressure. Check the complete air path, gas chemistry, motor, speed control and installation arrangement.
GHIMVENT · LN / MN / HN / H2N / RFN
Catalogue pages 93–189Illustrative system layout. Final component selection and installation are defined for each project.
Product groups
Five coordinated product groups, with detailed dimensions, configurations and performance data in the technical catalogue.
PP ducts & fittings
Circular and rectangular ductwork is coordinated with equipment connections and available space. The catalogue includes bends, branches, transitions, measurement points and inspection access. Welding and joint details are defined for compatible materials and the selected installation.
PP VAV units
The GRVT-R-EXN range covers DN 125-500 with published size-specific airflow limits. The controller compares measured airflow with the requested value and positions the damper. Installation requires 4D of straight duct upstream and 1D downstream, with access to the actuator, pressure tubes and wiring.
PP dampers & air valves
The range includes shut-off dampers, backdraft dampers, reversing valves and the GPGVUN gas-tight damper. The required function, material, connection type and actuation are specified for each duty; isolation requirements must be checked for the selected assembly.
PP grilles
The catalogue includes inlet/outlet grilles, a proposed linear bar grille and filtered return-air grille designs. Selection considers the duct connection, opening size and maintenance access. Open-grid PP panels are a separate grating product, with load and airflow performance requiring project confirmation.
PP & polymer fans
The GHIMVENT range covers duct and laboratory fans, low-, medium- and high-pressure radial fans, and roof fans. Select the model and motor on the relevant performance curve, then coordinate material compatibility, duct connections, sound levels and control sequence.
MATERIAL SELECTION
Start with the process medium
Specify the chemical composition, concentration and normal and maximum temperature before selecting the polymer. The range includes PP grades and project-specific PE, PVC, PVDF and ECTFE options. Material temperature limits do not define the operating limit of the complete assembly.
Define the complete configuration
The application, material grade and complete supplied configuration must be confirmed for the project. EX declarations and referenced certificates apply only to the specified configurations.
Where the process requires them, the catalogue also includes extraction hoods, flexible connections, sound attenuators, demisters, gas washers and polymer heat exchangers. Their inclusion is determined by the process and system design.
PROJECT COORDINATION
Selection starts with the project.
A complete selection connects the required airflow and pressure with the duct route, VAV operating limits and fan duty point. Define room or fume-hood control, alarms, power-loss response, electrical supply and commissioning requirements.
Airflow & pressure
Airflow and required pressure for each operating condition
Duct route & connections
Duct dimensions, connections and available straight lengths
Control sequence
VAV setpoints, fan speed control and system sequence
Inspection & maintenance
Access for inspection, cleaning and maintenance
TECHNICAL DOCUMENTATION
Polymer Ventilation Systems
Technical catalogue · English · 2026 / R18 · 190 pages
Share the process conditions, required airflow and available layout to define the appropriate product configuration.
Discuter de votre projet