मुख्य सामग्री पर जाएँ

लैबोरेटरी

LABORATORY & PROCESS EXTRACTION

लैबोरेटरी

A connected system.
From source to discharge.

Polymer ductwork, airflow control, grilles and fans coordinated for laboratory and process extraction. Each component is selected for the conveyed medium, airflow duty and installation conditions.

Explore the laboratory ventilation system

Hover over or select a product group to see its role in the system.

Laboratory extract system3D laboratory ventilation layout showing polymer ducts, a VAV unit, a branch damper, an extract grille and a roof-mounted fan.
Product information: PP ducts & fittings
Build the extraction route

PP ducts & fittings

Straight ducts, bends, branches and reducers connect the extraction points to the main duct route. Select the polymer grade, wall construction and socket or flange joints for the process.

Circular & rectangular sections

Catalogue pages 9–27
Product information: PP VAV units
Regulate to the setpoint

PP VAV units

GRVT-R-EXN measures airflow through a Venturi element and adjusts the damper to the control setpoint. Coordinate size, airflow limits, controls and any required EX configuration.

GRVT-R-EXN · DN 125–500

Catalogue pages 88–92
Product information: PP dampers & air valves
Balance or isolate a branch

PP dampers & air valves

Manual or actuated components regulate or isolate the selected branch. Match the operating function, seals, leakage requirement and connection geometry to the project.

Shut-off · Backdraft · GPGVUN

Catalogue pages 28–41
Product information: PP grilles
Connect the room to the duct

PP grilles

Grilles form the room-to-duct interface. Select the opening, airflow duty, mounting arrangement and cleaning access; project-specific designs are included in the range.

Inlet / outlet · Linear · Filtered return

Catalogue pages 56–61
Product information: PP & polymer fans
Deliver the required extract duty

PP & polymer fans

Duct, laboratory, radial and roof-mounted fans are selected by airflow and pressure. Check the complete air path, gas chemistry, motor, speed control and installation arrangement.

GHIMVENT · LN / MN / HN / H2N / RFN

Catalogue pages 93–189
  1. 01PP ducts & fittings
  2. 02PP VAV units
  3. 03PP dampers & air valves
  4. 04PP grilles
  5. 05PP & polymer fans

Illustrative system layout. Final component selection and installation are defined for each project.

Product groups

Five coordinated product groups, with detailed dimensions, configurations and performance data in the technical catalogue.

01

PP ducts & fittings

Circular and rectangular ductwork is coordinated with equipment connections and available space. The catalogue includes bends, branches, transitions, measurement points and inspection access. Welding and joint details are defined for compatible materials and the selected installation.

Range / configuration

Circular & rectangular sections

View catalogue · 9–27
02

PP VAV units

The GRVT-R-EXN range covers DN 125-500 with published size-specific airflow limits. The controller compares measured airflow with the requested value and positions the damper. Installation requires 4D of straight duct upstream and 1D downstream, with access to the actuator, pressure tubes and wiring.

Range / configuration

GRVT-R-EXN · DN 125–500

View catalogue · 88–92
03

PP dampers & air valves

The range includes shut-off dampers, backdraft dampers, reversing valves and the GPGVUN gas-tight damper. The required function, material, connection type and actuation are specified for each duty; isolation requirements must be checked for the selected assembly.

Range / configuration

Shut-off · Backdraft · GPGVUN

View catalogue · 28–41
04

PP grilles

The catalogue includes inlet/outlet grilles, a proposed linear bar grille and filtered return-air grille designs. Selection considers the duct connection, opening size and maintenance access. Open-grid PP panels are a separate grating product, with load and airflow performance requiring project confirmation.

Range / configuration

Inlet / outlet · Linear · Filtered return

View catalogue · 56–61
05

PP & polymer fans

The GHIMVENT range covers duct and laboratory fans, low-, medium- and high-pressure radial fans, and roof fans. Select the model and motor on the relevant performance curve, then coordinate material compatibility, duct connections, sound levels and control sequence.

Range / configuration

GHIMVENT · LN / MN / HN / H2N / RFN

View catalogue · 93–189

MATERIAL SELECTION

Start with the process medium

Specify the chemical composition, concentration and normal and maximum temperature before selecting the polymer. The range includes PP grades and project-specific PE, PVC, PVDF and ECTFE options. Material temperature limits do not define the operating limit of the complete assembly.

PPPEPVCPVDFECTFE

Define the complete configuration

The application, material grade and complete supplied configuration must be confirmed for the project. EX declarations and referenced certificates apply only to the specified configurations.

Where the process requires them, the catalogue also includes extraction hoods, flexible connections, sound attenuators, demisters, gas washers and polymer heat exchangers. Their inclusion is determined by the process and system design.

PROJECT COORDINATION

Selection starts with the project.

A complete selection connects the required airflow and pressure with the duct route, VAV operating limits and fan duty point. Define room or fume-hood control, alarms, power-loss response, electrical supply and commissioning requirements.

  • Airflow & pressure

    Airflow and required pressure for each operating condition

  • Duct route & connections

    Duct dimensions, connections and available straight lengths

  • Control sequence

    VAV setpoints, fan speed control and system sequence

  • Inspection & maintenance

    Access for inspection, cleaning and maintenance

TECHNICAL DOCUMENTATION

Polymer Ventilation Systems

Technical catalogue · English · 2026 / R18 · 190 pages

Share the process conditions, required airflow and available layout to define the appropriate product configuration.

अपनी परियोजना पर चर्चा करें
Gerhman Suite
↗
विंडो खिसकाने के लिए शीर्षक पट्टी खींचें। शीर्षक या आकार बदलने वाले हैंडल पर फ़ोकस होने पर तीर कुंजियों का उपयोग करें।

Suite को स्क्रीन पर रखें

यह दूसरी विंडो के ऊपर एक अलग Suite कार्यक्षेत्र खोलता है। पहले अपना प्रोजेक्ट सहेजें, फिर उसे वहाँ खोलें। पृष्ठ में मौजूद कार्यक्षेत्र खुला रहेगा; बिना सहेजे बदलाव स्थानांतरित नहीं होंगे।

Gerhman Suite बंद करें?

बिना सहेजा काम खो सकता है। इसे खुला रखने के लिए विंडो को छोटा कर सकते हैं।